Monday, 20 May 2019

Best Electrical Safety Tips for Your Home

Electrical Safety Tips for Your Home

Electrical appliances are typical in modern homes nowadays. This is the reason why risks and hazards can be neglected easily in terms of electrical usage. Make sure to check the principles of safety and keep everyone aware to prevent danger from hitting your home. In your household rules, be sure to implement safety usage of cords, light bulbs, and other equipment. Here are some things to keep in mind:

Electrical Safety Tips for Appliances

Electrical Safety Tips for Your HomeFirst, make sure that all your appliances are accredited by the Underwriters Laboratories (UL) or any other consumer laboratory with a reputable image. It is also a must to unplug all unused appliances and keep the cords away from pets and young children.

For appliances that produce heat – give them proper ventilation as they need good air circulation and cooling. Never dump clothes or toys over these warm appliances. Keep in mind the instructions for each of the appliances. Band-aid repairs or upgrades is a no-no. Find an electrician who can do it for you.

Also, keep the appliances away from water. Distance them from sinks, pools or bath tub which may cause drips and wetting. If you have wet hands or standing in a place with water, never operate any electrical appliance. Lastly, all combustible items such as clothes, toys, and curtains, must be kept away from space heaters, vents, and radiators.

Electrical Safety Tips for Cords and Outlets

For cords, make sure to check frays, cracks or kinks in it regularly. Do this before usage. Do not use them for another purpose – these do not jump ropes, leashes or clotheslines. Plug them firmly into outlets and if they are loose, choose a steadier outlet instead.

Electrical Safety Tips for Your HomeNever staple or nail the cords in a position at any point in time. Use tape or twist ties to secure it in its place. Also, do not place them under rugs as they can cause tripping and frays in the cord will be ignored. It also needs air circulation so hiding it will keep it from cooling down. Do not adjust the plug of a cord any time. Never clip off the third prong or file down a wider prong just so it would fit the outlet. Extension cords are never intended for permanent usage; these can only be used for a time being.

For outlets, block all unused ones and get a solid cover plate to hide them. Use childproof caps to keep them from the reach of children. Your outlets can only handle so much so do not overload them with power strips and adapters. Install ground fault circuit interrupter outlets in possibly hazard areas like pools, kitchens, and bathrooms. Cover all wiring with secure plates.

Electrical Safety Tips for Light Bulbs

Take note of the bulbs wattage requirements. Never use a higher wattage bulb as it may result in overheating. Try switching to LED bulbs as they offer the same level of light at a lower wattage. In the case of breakage, leave the room for fifteen minutes while keeping the window open. Screw the bulbs tightly to avoid shorts and sparks. Unplug and turn off fixture prior to installation of light bulbs.

Other electrical fire safety tips are as follows:

  • Keep your kids away from small or large electric appliances.
  • Replace all tools from which you encounter mild electric shocks. That includes light switches that have the tendency to flicker and those that are hot when touched.
  • Never force three-prong plugs into two-receptacle sockets and avoid overloading plus, outlets, and sockets.
  • Identify where fuse boxes and circuit breakers are placed and know how to operate them properly.
  • Never put water on an electrical fire, a dry fire extinguisher or baking soda must be used for this purpose.