Monday, 20 May 2019

Water Heater Maintenance Should Never be Missed

water heater

Winter is undoubtedly the time where water heaters are extensively used. Well, it is indeed challenging to take a bath just with tap water, thus, your heater should be perfectly working during these days.

If your water heater is new, then there’s nothing to be worried about. But if you have been using it for more than a year, checkup and maintenance procedures should be done immediately to ensure that you won’t have to endure the cold water coming out of your faucet.

Water Heater Problems

Water heaters have a separate storage tank that can hold as much as 50 gallons. During the process of heating, the water minerals separate and usually settle at the bottom of the tank. When too much, it can create a barrier that will hinder the heat from reaching the water. Thus, instead of hot water, you’ll notice that the temperature changes in the middle of your bath. When taken for granted, your water will no longer heat as desired or will stay lukewarm.

Another thing that you will notice is the popping and rumbling noise as soon as you open your faucet. This is due to the pockets of air in the sediment layer boiling with the water. After you have flushed your tank and still you still hear the unusual sound, it can be an indication that your water heater is on the verge of crack or leakage. A professional plumber will confirm and usually suggest you change your heater immediately.

The metallic scent and cloudy water can also be noticeable signs that there are too many deposits inside your water tank. However, if you notice that your faucet emits red or brown-colored water, then it can indicate that the metal tubing has rust.

Leakage is another serious issue that you need to look out when you have a water heater. Do you notice water pooling beneath your tank? Cracks in your water heater can be due to the corrosion within your tank. However, if it is from the temperature and pressure relief (TPR) valve, then it could be because of the excessive pressure or overheating. To test, get the lever and raise it up and down. The pressure should still be the same, regardless of the level of the lever.

A trusted plumber can check these issues. Make sure to contact one once a year so that your water heater can be inspected and the insides can be cleaned. Additionally, you must also see an electrician check if the wirings that support your water heater is still perfectly working to ensure that you won’t be susceptible to life-threatening accidents.